Messages
09.00 Karl Jacobsen
09.30 ?yvind Pedersen
10.00 Stergiani Charisi
10.30 Christopher Friedemann
11.00 Anna Piterskaya
11.30 Lene ?strem
12.00 Peter Killingstad
12.30 Anders Utnes
13.00 Hannes Kruse
13.30 Shako Farhad
Just knock on the door:-)
15 minutes presentation of final project followed by 15 minutes of questions from the syllabus. Power-point, Keynote or PDF ok. I will have a Mac hooked up and you can either send me the presentation, bring a usb or your own laptop. If you send it I will have the chance to test that it works.
The presentation should start with a project description. It is difficult to give general advice, but briefly it is your responsibility to make the presentation as clear and concise for the external sensor as possible. Emphasize what you have done, both why and how you have done it the way that you have. Explain the results. Model sensitivity, mesh sensitivity and sensitivity to numerical methods are relevant topics for most projects.
but please come and see me in my office and I will advice on the project description that is to be approved by Friday 7/4.
Implement a backwards facing step in OpenFoam using the icoFoam solver. Use expansion factor of 2 and Re=200 (stable) and Re=1000 (unstable). See, e.g., http://www.cavityflow.com/backwardfacingstep/backwardfacingstep.htm.
The high Re case should be unstable with default numerical methods in OpenFoam. Make a more suitable choice of numerical scheme for convection and compare different methods (upwind/TVD).